I had a piece of test equipment fail on me today. It was reading anywhere from -30dB to -70dB down from the levels it should have. I figured out that the cable between one part and another was broken. There was no physical contact at all, and the signal was still passing - though it was greatly attenuated at lower frequencies. There was NO physical connection and the signal was still going through at a useful level! Witchcraft I tell you. Repairing the cable made it work all better again.
********
*little-known because I just made it up.
No comments:
Post a Comment
I will review your comments prior to publishing them. Almost all comments are approved and published within a day or two. When you post a comment, Please bear in mind that you are addressing me personally. To be clear: I generally prefer clarity to agreement. Make your point, but be nice about it and don't annoy me, and you will likely see your comments published here.
Comment Moderation Statement